New High Load Traveler on Cabin Top
November 26th, 2019 | by Rigworks
Our riggers just completed the design and installation of this custom traveler on the cabin top of a lovely Hanse
Browsing the "Harken" Tag
Falls System for Rig Climbing
November 12th, 2018 | by Rigworks
Our last ‘Ask the Rigger’ about going aloft generated a lot of interest in our Falls Systems, the hardware we
Genoa Furling Systems
December 7th, 2017 | by Rigworks
Question: What should I know about genoa furling systems? From the Rigger: If you buy a furler, you will use
Pamper Those Navtec Parts!
March 23rd, 2017 | by Rigworks
Question: I have Navtec parts on my boat. Now what? From the Rigger: As many of you know, Navtec and
Caring for Your Hydraulic Backstay Adjuster
September 13th, 2016 | by Rigworks
Question: How do I best use and maintain my hydraulic backstay adjuster? From the Rigger: Hydraulic cylinders allow us to pull
Summer Hours… Busy, Busy, Busy
June 21st, 2016 | by Rigworks
We have just entered our busy season and are literally buried in work. (Can you guess which rigger is buried
Our Latest 5-Star Rating on Yelp
March 1st, 2016 | by Rigworks
We are very proud of our recent 5-Star review in Yelp… “I can’t say enough good things about Rigworks. These
Yacht ‘Chim Chim’ Shows Off Her Rig
January 4th, 2016 | by Rigworks
2015 was a busy year at Rigworks. One of our favorite projects was the retrofit of Gunboat ‘Chim Chim’. Work
-
What’s New
-
Do Your Masthead Sheaves Need Replacing?
October 26th | by
-
NO on Prop 15
October 15th | by
-
Ray Aloft…
July 13th | by
-