TP52 “Patches” Gets New Standing Rigging
February 19th, 2016 | by Rigworks
Our riggers have been hard at work preparing TP 52 ‘Patches’ for the 32nd annual Puerto Vallarta Race. Over the
Author Archives: Rigworks
Anatomy of a Halyard
February 18th, 2016 | by Rigworks
Question: What should we look for when selecting a halyard? From the Rigger: The Anatomy of a Halyard… In its
New Custom Vang on Brushfire
January 28th, 2016 | by Rigworks
Check out the beautiful new vang we just installed on the yacht Brushfire. We used a custom stainless tube on
J/165 Navtec Hydraulic Panel Rebuild
January 27th, 2016 | by Rigworks
How would you like to put this jigsaw puzzle together? These are the parts and finished rebuild from a J/165
Navtec Titanium M Cylinders
January 20th, 2016 | by Rigworks
The hydraulic technicians at Rigworks have been rebuilding these Navtec Titanium M cylinders for a Reichel Pugh 63 race boat.
Riggers at Work
January 7th, 2016 | by Rigworks
It might be raining like crazy in San Diego this week, but our riggers are still hard at work. Stuck
Yacht ‘Chim Chim’ Shows Off Her Rig
January 4th, 2016 | by Rigworks
2015 was a busy year at Rigworks. One of our favorite projects was the retrofit of Gunboat ‘Chim Chim’. Work
Dyneema Life Lines from New England Ropes
December 17th, 2015 | by Rigworks
Replace your wire lifelines with Dyneema lifelines from New England Ropes. Dyneema is lighter and stronger than wire, has excellent
Facnor Flat Deck Furler
December 3rd, 2015 | by Rigworks
Our team at Rigworks has just finished the installation of this Facnor Flat Deck Furler. The low profile mechanism offers
Custom Furling Line Leads
December 2nd, 2015 | by Rigworks
Check out the custom furling line leads that we created for the Gunboat 62 ‘Chim Chim’. Made from Antal low
-
What’s New
-
Safety at Sea Seminar – Jan 2019
December 12th | by
-
Gottifredi Maffioli Rope at Rigworks
December 11th | by
-
Replacing Your Standing Rigging
November 27th | by
-